Function:: Digital LED Display, privacy, Heat Adjustment, Auto shut-off, Heat Control, LED indicator light, Timer Function, Anti shock, Single Service, Automatic, Single Serve, USB Rechargeable

Product name:: Duplicator Remote Control

Frequency:: 315/433.92 MHz

Voltage:: DC12V

Distance:: 100M

Current:: 12mA

Size:: 55*30*13.5mm

Buttons	2-4
Operating voltage	DC12V
Operating current	10MA
Operating frequency	315Mhz, 433Mhz, 868.35Mhz, 869.85Mhz, 290Mhz - 480Mhz
Ambient temperature	-20 °C ---- +50 °C

Kelvin 4-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors , Gates doors, Alarm systems etc. Fixed frequency
 (433.92mhz or 315mhz) for copying 99.99% common fixed and learning code remote controls.
 Face to face copy the functions of your original remote by this 4-channel RF remote control duplicator with code learning
 functions and you'll always have a back up.
 Duplicate Your Existing Remote Controllers:
 1. Vehicle central locking systems
 2. Garage doors
 3. Electronic gates
 4. Electrical appliances
 5. Car sunroofs
 6. Heating systems

 Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage.
 Works with the following remote control modules (please check your existing remote control before ordering): Your remotes also
 should be Fixed code or Learning code.
 2260, 2262, FP527, HT12D , HT12E , PT2240, S026-1 ,S026-2 ,S026-3 ,S026-4, SMC918.... etc
 Please note this does not copy rolling code

Product Usage

1, Clear code:

Press and hold the top two buttons (lock andunlock label) at the same time for approximately 3 seconds, then LED indicator
 flashesthree times, followed by a continuous fastblinking, indicating that the remote control codesstored is deleted.

2, Programming

Place the original remote control and copy remote close together (<10mm)
 Press and hold one button on your original remote and the button on copy remote which you wish to be programmed on at the same
 time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that
 the button is successfully copied.
 Repeat the above clone step for other buttons you wish to copy.
 NOTE: The best duplicating position varies depending on the original remote control you are using, you can try different positions
 until the code is successfully copied.

3, RecoveryPress and hold the left two buttons (lock and mute label) at the same time for approximately 3 seconds, then LED indicator flashes
 three times, followed by a continuous fast blinking, indicating that the original remote control codes have been restored.
 The alternate way to code recovery step is clear the codes and relearn them again.

315MHz 433MHz 868MHz Wireless Garage Door Remote Duplicator

Smart WIFI Door Lock

Fingerprint Door Locks

Rim Door Locks

Bluetooth Gate Locks

Waterproof Smart Locks

House Smart Locks

Office Biometric Locks

Frameless Glass Door Locks

Fingerprint Cabinet Locks

Euro Spec Locks

French Door Security Locks

Smart Bedroom Door Lock

Aluminium Door Locks and Handles

Face Recognition Door Locks

Automatic Front Door Locks

Hotel Smart Lock

Ibutton And Smart Cards

315MHz 433MHz 868MHz Wireless Garage Door Remote Duplicator

315MHz/433MHz/868MHz Wireless Car Gate Remote Control Duplicator for Garage Door KL180-2K/4K

1, Clear code:

2, Programming

3, Recovery

868mhz security door system

rf remote control ev1527

433mhz remote control